I have a ton of mustang parts to get rid of.

[QUARTER MILE MUSTANG]

Like the title says. I have a ton of mustang parts i want to get rid of when i move out to Arkansas. I'm not gonna post prices, just make me a sensible offer on anything your interested in. I can email pics or post them if needed. I'll add more as i clean.

NIB MSD universal BTM ignition
used but in new condition Crane cobra 1.7 rocker arms
NIB motive gear pro series 3:73 ring&pinion set
NIB richmond 3:55 ring&pinion set
NIB autometer trans temp gauge p/n 3552
NIB autometer liquid filled fuel pressure gauge p/n 4612
NIB UPR polurethane motor mounts for foxbody
1.6 pro comp pedestal rocker arms
JE custom turbo/blower pistons for 5.4 rod/3.25 stroke crank .040 over
Total seal file fit hellfire rings for above pistons
P.I. cams and valve spring setup.
3 NIB trickflow valve spring upgrade spring kits for stock style heads
March alternator mount setup for electric waterpump
Lentech 4000 stall turbo converter for AOD
New K-motion K900 solid roller valve springs with retainers/keepers

[Unclesams_SVO]

I'm interested in the boost controllers.

What kind are they, do you have any 2 stage elec ones?

[QUARTER MILE MUSTANG]

Sorry, I dont have anymore of the electric 2 stage left. I have 1 red turbosmart manual in cab left. Its a gated setup so you can adjust how fast it brings the boost on. it comes with all the fittings and silicone hoses for the install.

[stumbaugh]

How much for the JE 5.4 pistons?

[QUARTER MILE MUSTANG]

Make me an offer. But just to clarify what they are they are for a 302 based 331 motor not a modular 5.4.

[Str33tr]

man I'd love to get those GT40 heads and some of your valvetrain goodies, but I'm not to that part of my project yet!

[stumbaugh]

How about the YSI blower set up?

[QUARTER MILE MUSTANG]

Te Ys trim is for a 02 as well and i still have both blwer and pistons. I can bring them back with me next week from N.M. if interested.

As for the GT40 heads, just let me know when your ready. I have a couple sets of them.

[Blackjack]

What are you looking for on the BOV's?

Thanks

[QUARTER MILE MUSTANG]

I'd like to get $175/ea. I think i have blue and sleeper series left.

[stumbaugh]

How much are you wanting for the blower set up?

[QUARTER MILE MUSTANG]

How much are you wanting for the blower set up?


I'd like to get $1500

[stumbaugh]

Hat all does it come with?

[QUARTER MILE MUSTANG]

its a hybrid setup. It's a drivers side mount head unit that is almost brand new. It has all the bracketry for a passenger side mount,smog pump eliminator,alternator relocation bracket,belt and pullies for 17 psi,oil feed/return lines, front mount air/air and all the piping. The guy i got the kit from built the piping and some of the welds need to be redone. It needs a BOV added to the charge piping and needs a blower belt tensioner which i can get for the buyer at my cost. you also need to rig up the inlet piping cause this setup was built for a car that had a gen VII and only had a filter attached to the blower.I can help the buyer gather all the needed parts.

[Blackjack]

Hey, what brand are the BOV's?

Thanks

[QUARTER MILE MUSTANG]

[QUOTE=Blackjack;14636]Hey, what brand are the BOV's?

They are Turbosmart ultra gates

[Davis]

How much for the gt40's I also need an intake, headers, and a tb for a 302.

[stumbaugh]

How much do you want for the Victor heads?

[QUARTER MILE MUSTANG]

How much do you want for the Victor heads?

Victor heads are sold.

[Ryan]

got any pics of the foxbody motor mounts? mine are shot...

[QUARTER MILE MUSTANG]

Sorry,i dont have any pics of them. they are the red poly ones that you an completely unbolt. these look idnticle to the UPR ones-
http://www.summitracing.com/parts/PTP-6-501/

[Ryan]

works for me. how much you want for them?

[QUARTER MILE MUSTANG]

Is $50 fair?

[scotch_01vert]

so ok i am slow on what will work on my car but will the 3.73's work in an 01 gt? if so how much

[Unclesams_SVO]

Do you have any axle shafts, 4.10 gear set or rebuild kits for a 8.8?

[Ryan]

ive tried getting in touch with this guy. anyone know where hes at?

[oxman]

I haven't seen him on lately, but he may be in the process of moving from New Mexico?

[QUARTER MILE MUSTANG]

I'm still alive, sorry for the delay in getting back to everyone, i have been traveling back and forth to Nm trying to finish my cars up so i can move them out to AR. Yes the 3:73 will work in a 01. I dont have any axles in stock, i got rid of all my inventory but still have all my distributor status until 2011 which is when they expire since im not gonna transfer my business to AR so if you would like me to look something up let me know. I dont have any complete rebuild kits but i have a couple ratech 8.8 kits that have the pinion nut,crush sleeve carrier bearings,ring gear bolts and a pinion seal i believe.

[06MUSTANGGT24V]

anything for a S197?

[QUARTER MILE MUSTANG]

All i have left for a S197 is a GT500 fuel pump assembly and the dual FPDM setup to make it run in a GT. If your interested in that let me know.

[Unclesams_SVO]

I picked up a 8.8 and I need to rebuild it. I need gears and all the stuff to put it in.

So any help on a price hook up would be greatly appreciated :)

[QUARTER MILE MUSTANG]

What gear ratio would you like and do you have a preference on rebuild kit brand? Are you gonna reuse the stock axles or use a C-clip eliminator axle? That way i Know what all needs to be included in the kit. Let me know that info and ill price it and PM you. I can get Ratech,strange,Richmond, superior and motive gear rebuild kits.

Thanks
Mike

[Unclesams_SVO]

4.10 gears, and complete axle rebuild kit with all the bearing and seals. A cf disk posi rebuild kit (stock unit) and depending on the cost a c-clip eliminator kit. I'll be reusing my axle shafts. The axle came out of a 99 GT if that makes any difference.

I'm not particular to any brands, I just want some quality stuff that will last a long time behind and to handle my future hp/tq plans.

[adam2kgt]

Future hp/torque plans, for a 4cyl turbo mustang? What, 450 hp at 10,000 rpm and like 150 lbs of torque? LOL, just kidding with you man. You are still as quick as Grant. Which means quicker than me.

[Unclesams_SVO]

My plans are to put around 300-350 hp/400 tq to the tires. I just want an axle that can handle the hp and the track abuse associated with auto-crossing and some drag racing.