Need rear calipers and brackets

[Unclesams_SVO]

I'm rebuilding a 8.8 and I need some rear brake calipers and the brackets from a 99+ GT, Bullet or Mach1.

[adam2kgt]

No, you need calipers and brackets from a 96-04 Mustang V-6 or GT, unless you want to upgrade to bigger brakes, like Bullitt, Cobra, or Mach 1. If you upgrade to the bigger brakes, it may throw off your brake balance, though you should probably install an adjustable pressure regulator anyway.

[Unclesams_SVO]

Bigger front brakes are a part of my plans as well. No need to buy things twice, that is why I searching for those. But thanks for the heads up.

[adam2kgt]

Call O'Reilly or Napa. Sometimes they sell loaded calipers, with brackets, pads, and all. Then all you would need are rotors.

[Unclesams_SVO]

This is what I'm looking at getting, if I can find some calipers at a decent price.

http://www.summitracing.com/parts/FMS-M-2300-M/

Unless someone has something on the board that I can use instead.