Ryan
03-28-2010, 05:38 AM
Just getting a little feeler for interest on my mustang. I have a 1991 Mustang GT Mineral Gray color I believe and has lots of mods done to it. Motor is a 306 and has about 2200 miles on it and was done by Cabot . Paints in good shape. Interior pretty clean.
Engine:
Roller 302 bored/honed .030 over
New cam bearings/rod bearings/main bearings/freeze plugs
Block was decked
TRW Forged alum. pistons about 9.75:1 Compression
rods resized with ARP rod bolts
Trickflow Stage1 cam .499in/.510exh
new lifters
new double roller timing chain
Brodix St 5.0r heads 171cc with 60cc chambers
7/16 stud mount 1.6 roller rockers
ARP headstuds
BBK valve covers
Professional Products Intake
65mm BBK throttle body
75mm MAF
Hooker Supercomp headers
H-pipe with chambered flows dumped at axle-sounds awesome
New water pump
New power steering pump
New electric fan
New oil pump
New 180* t-stat
Drivetrain:
Centerforce Dual Friction clutch
Tremec 3550 trans
Pro 5.0 short throw shifter
Aluminum driveshaft
Rebuilt trak lok 3.73s
Suspension:
Stock with Tubular upper and lower rear controls
Wheels/Tires:
Summit Prostars 4lug 15x4 up front with 195/60 15x8 in the back with 255/60 Yokohoma Avids
Price is 5500
My name is Ryan call me at 501-912-4083 for any questions.
http://i214.photobucket.com/albums/cc280/73TorinoGuy/24149_1291492880668_1030620273_3074.jpg
http://i214.photobucket.com/albums/cc280/73TorinoGuy/4393207967_ff9e7d225b_b.jpg
http://i214.photobucket.com/albums/cc280/73TorinoGuy/B_IMG_7439.jpg
Stumbaugh on here has seen the car and person and hopefully can vouch for it!! This car will get down. best time was 10.78 and that was spinning through first. has way more potential!
Engine:
Roller 302 bored/honed .030 over
New cam bearings/rod bearings/main bearings/freeze plugs
Block was decked
TRW Forged alum. pistons about 9.75:1 Compression
rods resized with ARP rod bolts
Trickflow Stage1 cam .499in/.510exh
new lifters
new double roller timing chain
Brodix St 5.0r heads 171cc with 60cc chambers
7/16 stud mount 1.6 roller rockers
ARP headstuds
BBK valve covers
Professional Products Intake
65mm BBK throttle body
75mm MAF
Hooker Supercomp headers
H-pipe with chambered flows dumped at axle-sounds awesome
New water pump
New power steering pump
New electric fan
New oil pump
New 180* t-stat
Drivetrain:
Centerforce Dual Friction clutch
Tremec 3550 trans
Pro 5.0 short throw shifter
Aluminum driveshaft
Rebuilt trak lok 3.73s
Suspension:
Stock with Tubular upper and lower rear controls
Wheels/Tires:
Summit Prostars 4lug 15x4 up front with 195/60 15x8 in the back with 255/60 Yokohoma Avids
Price is 5500
My name is Ryan call me at 501-912-4083 for any questions.
http://i214.photobucket.com/albums/cc280/73TorinoGuy/24149_1291492880668_1030620273_3074.jpg
http://i214.photobucket.com/albums/cc280/73TorinoGuy/4393207967_ff9e7d225b_b.jpg
http://i214.photobucket.com/albums/cc280/73TorinoGuy/B_IMG_7439.jpg
Stumbaugh on here has seen the car and person and hopefully can vouch for it!! This car will get down. best time was 10.78 and that was spinning through first. has way more potential!