parting out 04 cobra

[sweet2kstang]

i am parting out an 04 cobra that lived a very short life. it has 28k on the odo before it was hit on the drivers front. no fenders, hood, bumper etc. the fuel tank, pumps, mirrors, shocks/struts, center console caompartment are all sold. everything else is up for grabs. everything is first come first serve.


side scoops- 150
side skirts-200
trunk lid w/ spoiler- 350
rear bumper- 300
wheels/tires- 800
a arms- 150
irs- 800
drive shaft- 100
t56 trans- 800
motor- 6000
wiring/ecu- 300
doors- 200
front and rear seats- $1000
sail panels and glass (hopefully glass will not break on removal)- 175
pedal assembly- 125
mgw shifter- 125
carpet- 50
console- 50
dash- 50
tail lights- 60
front and rear brakes- 400

http://i374.photobucket.com/albums/oo190/stocksilverstang/2008_0614Image0015.jpg
http://i374.photobucket.com/albums/oo190/stocksilverstang/2008_0614Image0008.jpg
http://i374.photobucket.com/albums/oo190/stocksilverstang/2008_0614Image0016.jpg
http://i374.photobucket.com/albums/oo190/stocksilverstang/2008_0614Image0004.jpg
http://i374.photobucket.com/albums/oo190/stocksilverstang/2008_0628Image0051.jpg
http://i374.photobucket.com/albums/oo190/stocksilverstang/2008_0628Image0161.jpg
http://i374.photobucket.com/albums/oo190/stocksilverstang/2008_0628Image0141.jpg[/QUOTE]

[06MUSTANGGT24V]

man i wish i had a white new edge gt right about now would love that rear ouch :P :P

[Joey5.4]

I could use that intake tube if you will sell it, pm me a price

[sweet2kstang]

pm replied

[ArkansasMystic]

What size are the wheels? What kind of tires are on them, and how much wear do they have?

[stan00gt]

yeah, i have a white gt but with christmas dont have the money for the trunk and bumper :( but if they havent sold by the first maybe then :D

[Joey5.4]

Another pm sent, thought of more parts I need lol

[01LonestarBullitt]

dang i wish i had the money to buy that engine, trans and ecu off you, i really want to do a terminator conversion on the bullitt.

[06MUSTANGGT24V]

that would be SWEET :o

[1low03gt]

dang i wish i had the money to buy that engine, trans and ecu off you, i really want to do a terminator conversion on the bullitt.
I was thinking the samething!!! :cry:

[01LonestarBullitt]

maybe if u still had it after summer when i get an engineering internship i could afford it, i'd drive there to pick it up or pay for shipping whichever was cheaper. But i know that engine for the price it'll go fast.

[sweet2kstang]

we trying to get everything sold as fast as we can. i am thinking of doing the swap as well, but i dont think iput that much money into a mustang.

the wheels are stock 17x9 with bfg g-force sports. they are about half worn.

[AzianStang]

What MGW shifter is it?

[Bigjht]

I don't know if you are aware of this site but some of the guys in Tulsa would probably be willing to come over here for some of the parts. I've sold quite a few items on their forum.

http://www.okdhm.com/forums/?

Oh yeah, and thanks for the advice on the exhaust shop on ARRides. I may be checking them out soon.

[sweet2kstang]

thanks for the heads up on the forum, but i cant keep up with all the ones i am on now.

the mgw is for a t56.

[sweet2kstang]

wheels/tires
drivers side drip rail molding

sold

[stumbaugh]

That seems a little steep for a used motor, even if it is a 4v motor. The 5.4 aluminator's are sold all day long for less than that man. Im not trying to mean any offense, just saying you might need to come off of 6k for that 4v, that is very cheap for that t56 tho!

[sweet2kstang]

steep for that motor??? i dont even think so. those motors go for more than that, not to mention its only got around 5k on it. plus the motor is complete from pan to blower. if you arent interested in buying it, then dont worry about what i price it at.

[Joey5.4]

the iron block is better for supercharged engines. thats why ford used it in the terminators. the aluminum blocks would show wear on the front maint bearing with the stress of the blower. and depending what aluminum block you are talking about also makes a differnce. the WAP(01-02) and NVH(03-04 mach,maurader,aviator) are not recomended for over 700hp. the Teskid(93-99) is only 4.6 aluminum block to hold horspower like the iron block. yea the iron block is cheaper but also better depending on your purpose. but that is a turn key motor with all forged internals with a blower ready to go, 6k is not a bad consider them engines with turbo set ups or better blowers are capable of making 900+hp on a completley stock long block, i mean stock cams,heads and all.

[stumbaugh]

I did not know it came with the blower, my fault. I apologize. And the aluminator motors are the same motors that came out in the Ford GT's. I thought u were saying that you wanted 6k for the motor without the blower. The only reason that i mentioned the aluminator is because ive seen stock aluminator short blocks pushed WAY over 1,000hp. But like i said, i didnt know it had the blower with it so my bad.

[01LonestarBullitt]

ya those engines and t56 trans brand new on ebay are going for 9500

[Joey5.4]

I did not know it came with the blower, my fault. I apologize. And the aluminator motors are the same motors that came out in the Ford GT's. I thought u were saying that you wanted 6k for the motor without the blower. The only reason that i mentioned the aluminator is because ive seen stock aluminator short blocks pushed WAY over 1,000hp. But like i said, i didnt know it had the blower with it so my bad.
oh i thought you were talking about aluminum 4.6's, yea the gt aluminum 5.4's can handle any power you throw at them.

[silverM6TA]

if you still have that t56 can u hold it for me and the clutch?

[sweet2kstang]

everything is first come first serve. the only way i will hold something is to leave a refundable deposit of half.

[AzianStang]

I need a decent looking wiper (not blade) for my driver's side.

[sweet2kstang]

i think they are there. i will have to double check this weekend.

[stan00gt]

hey man i have a buddy that is interested in the motor if u still have it please give me a call at 870-370-3507, thanx stan

[oxman]

Hey do you still have the pedals? If so, how much do you want for em?

[sweet2kstang]

the whole assembly? or just the covers?

[oxman]

just the coversthe whole assembly? or just the covers?

[sweet2kstang]

honestly, it will be a lot cheaper to just go buy a set. the pedal assembly goes pretty high, not to mention removal is a pain and installation is even harder. i dont want to risk screwing them up for ya.

[oxman]

where do you recommend getting them?

[sweet2kstang]

i bought mine off ebay. i would recommend ebay or american muscle.

[stumbaugh]

did u ever sell the mirrors?

[sweet2kstang]

yes, i believe they were the first things gone.

[oxman]

I'll check em out, thanks man!i bought mine off ebay. i would recommend ebay or american muscle.

[PLUMBBOOSTED]

would you sale just the spoiler instead of trunklid/spoiler , bc im looking for the spoiler bt i dont want the lid too! if so price?

[sweet2kstang]

i dont want to split the spoiler off the car, i dont want to be sitting on a decklid that wont sell.

[05 S281]

motor and tranny still available? If so, I think I may have a new home for them.

[sweet2kstang]

yes so far. i have a lot of interest in the trans, but i still have to get shipping quote for it.

[AzianStang]

Wiper check?

[sweet2kstang]

man, i am so sorry. we do have the wiper arm. its somewhere in the pile of stuff, but we do have it.

[rcstang]

do you still have the rear bumper?

[sweet2kstang]

yes

[06blackgt]

will the t56 work on a 96 gt 5-speed?

[Blackout_03]

it will but will need to buy a different bellhousing. And drive shaft i think

[Joey5.4]

if you get the trans with bell and all, it it will bolt right up 96 gt, the trans bolt patterns are the same on all 4.6 and 5.4's except some ofthe first 4.6 lincolns. I figure a terminator drive shaft will also work since they are all built on same platforms.

[Bigjht]

The bellhousing will work but the driveshaft is not a direct fit. The length of the shaft is different than the stock because the pinion flange does not sit in the same place in the car on the IRS as the solid axle. Plus the GT pinion yoke will need to be placed on the cobra driveshaft as it is smaller than the Cobra's, which will not bolt to the GT rearend. This will require a different U-joint. The caps on the Cobra are a larger size for strength so it will have to be one that has both sizes to accommodate the cobra driveshaft size and the gt yoke. I forget the size though but you could search most of the forums and find out. Back to the length, if I'm remembering correctly the cobra driveshaft is actually a tad shorter so a spacer is needed, but again, there are a ton of posts about this on most of the other forums. I did the swap with the IRS as well so I didn't have to worry about it but the guy I swapped with had to go through most of this and I'm going by what he told me he had to do. I hope this helps if you're going that route. I actually thought the T56 was easier to take in and out of the car. You can separate the bellhousing from the transmission while in the car, unlike on the T45, which frees up space to take the bellhousing bolts out. It's a lot heavier which poses some fun but all in all it's easier.

[sweet2kstang]

the trans would bolt right up. i was pretty sure the t56 and cobra d/s was a strait forward swap, the location is the same just length difference cause of the t56.

the motor, trans,motor wiring, cluster, irs, brakes, were sold today as well.

[sweet2kstang]

Wiper check?

i got it sitting in garage waiting for you to say if you want it or not.

[AzianStang]

Hey man I'll take the wiper... how much?

[sweet2kstang]

pm replied

[rcstang]

do you still have the sixspeed and will it mount right up to my 01 cobra?

[abdullaGT]

I'll be more than happy to buy the spoiler alone if u want to sell that!
please let me know if you're interested asap! thanks

[sweet2kstang]

i dont know what all is left. the spoiler itself is no for sale, it has to go with lid and everything. i will have to get an inventory of whats left too.

[oxman]

do you still have the front or rear bumper covers? decklid? thanks

[sweet2kstang]

the car was in a front end and the rear bumper was sold. i think the decklid is still at the house, i havent heard of it getting sold.

[oxman]

pm me your price

[sweet2kstang]

let me make sure he still has it first.

[oxman]

ok

[abdullaGT]

Whats the best you can do on the trunk lid with spoiler??

[Davis]

Do you still have the dash?

[sweet2kstang]

sorry for the delay'd response, been a busy and bad time for me. the trunk with spoiler is a steal at $350, i dont even want to let if go for that. they go for 450+ usually. he still has the dash, but i think he wants to sell the interior complete as possible.

[94STEED]

DO YOU STILL HAVE THE FRONT SEATS? I NEED A SET

[sweet2kstang]

the seats will only go as a set with the rears.

[stumbaugh]

Can you get me a price of the decklid with spoiler and the seats???

[sweet2kstang]

$1350 is a pretty decent deal, we can negotiate thru pm's if you would like.

[stumbaugh]

I will throw you a PM.

[backfocus]

Hey sweet2kstang,

I shot you a PM a month or so ago about the brakes, was wondering if you they had been sold or not. Mostly interested in the calipers.

[sweet2kstang]

sorry i didnt get back with you, they were sold. sorry.

[evasbird]

is this car still around/have any parts left for sale? im looking for a few little things for mine.

[sweet2kstang]

i have a few things left.

[evasbird]

just looking for extra little pieces just to have as extra. can you let me know little of what ya got. any interior things left?

[sweet2kstang]

we have everything to the interior minus the console tray. you can pm me everything you need and i will take an inventory.

[evasbird]

pm sent.