new from bentonville

[sweet2kstang]

i'm a newb from beontonville, got a bolt on and sprayed 2000 gt.

[oxman]

Welcome man glad to have ya! As always if you have any ideas,questions,comments or whatever about the site to improve it let us know we'd like to hear from ya! :)

[Bigjht]

How often do you go to the strip and which one do you go to? I've been thinking of going up to MoKan one Friday night soon. I work in Bentonville myself so I've probably seen you around.

[sweet2kstang]

my only complaint about the sitte, is trying to load photobucket pohtos. this set up wont allow the full pic to show.

we havent hardly gone to the traack this year, didnt go mcuh last year either. last year i kept breaking my canr, and we have had our hands tied up with the mach build.

[SlvrStang99]

Welcome to the Site! As far as the Photobucket issue...make sure the resolution is set to 640 x 480 when you upload them. This is a Message Board size photo. Anything else is too big; it causes slower loading times and a photo you have to chop off lol.

I'm gonna be a site whore lol and invite you to also check out SilverMustangs.com. The owner is from Pensacola (moved but can't remember the town) and created it back in late 2006. I've been a member since February 2007. We have message boards, a Silver Registry, sponsors, etc. Nice site, you should check it out :) Of coarse that doesn't mean go there and stay away from here :cry: I'm on both sites a lot! Just make sure you tell em Dierks_Outlaw54 sent ya ;)

[Bigjht]

What kind of Mach build up are you doing? Know anymore mustang guys in the bentonville area?

[sweet2kstang]

me and a friend are building his 03 mach. we are hoping to have it in and running by the weekend. i know a few mustang guys and a few camaro guys around here. i do work on a few of them as well. i dont get out much, i work all the time and work on cars when i am not at my job.

[SonicSteed]

welcome to the gang man, what kind of numbers are you putting up with that thing? glad to have ya...

[sweet2kstang]

i went to supertune outside of kansas city not too long ago. it was over 100 degrees in the shop, i drove 3 hours there, then the car was strapped to the dyno without time to cool off at all. i put down 257/286 on motor, and 347/422 on the bottle. for some stupid reason, my nitrous decided to start cutting out during the session. it cut out where my peak hp should of been. i am going to redyno soon, i believe i will see around 270/290 and 380/450 when i go again.

[1low03gt]

Very nice,and welcome abaord!!!

[Bigjht]

Sounds like you have plenty of help but if you ever need another set of hands let me know. I'll be happy to help. I'm no master mechanic but I experienced a lot with my 99. Maybe I'll see you around.

[sweet2kstang]

i always up to meeting up with car people. i have the tools to be able to do most things, and even have my own nitrous fill station.

[SlvrStang99]

Sweet!!! So I know who to go to when I get everything for my V-6 to GT conversion lol.

[Bigjht]

i always up to meeting up with car people. i have the tools to be able to do most things, and even have my own nitrous fill station.


Sweet, do you know any good local shops or had any experience with anyone? Closest I've found so far was Springfield and I didn't have a great experience there.

[sweet2kstang]

there are only a couple shop that i even consider using when there is something i cant do. what kind of stuff you looking to have done?

[Bigjht]

The only thing that may come up soon would be rear gears but any good shops would be good to know of. I always have hopes of a supercharger one day but I know it won't be any time soon.

[sweet2kstang]

i did my gears in my car. i would have to see if the the shop i would recommend would do them and when.