Let's hear those mods!!

[stumbaugh]

Just wondering if everyone with the 94-04 GT's would list up there Mods list and what it ran. That way everyone can get an idea of what there car would run like if they did one of the mods you have. Just a thought.

[04_S/C_GT]

It weighed in at 3360 lbs and dynoed at 396 hp and 402 ft lbs of torque.

UPGRADES:
Vortech V-2 SQ S-Trim High-Output System which includes intercooler
Anderson Power Pipe
C&L Intake Plenum and Throttle Body
Ford Racing EV1 Style High Flow Fuel Injectors-42 lb
Steeda Drag Springs
Spec Stage 2 Clutch
Steeda Clutch Adjuster Kit
Steeda Tri-Ax Short Throw Shifter
MAC Prochamber
Flowmaster Catback
Mach 1 Grill Delete and Chin Spoiler
17x10.5 Rims on the rear
8 inch Black Antenna
A-pillar Triple Gauge Holder
Autolite Air-to-Fuel Gauge
Autolite Oil Pressure Gauge
Autolite Boost Gauge
Autolite Shift Light
Ford Racing Bullitt Pedal.

11.04@102 in 1000ft
It does no good when you cant get the power to the ground. My advice is to makes sure you have the tires and suspesion to handle the power.

[stumbaugh]

1999 Mustang GT

BBK shorty equal length headers
Off road H pipe
Magnaflow mufflers
fidanza billet aluminum flywheel
SCT SF3 tuner
3.73 gears
BBK 75mm throttle body

10.99 at 93mph. Only dyno'd 235rwhp and 273rwtq due to a bad fuel pump.

[04_S/C_GT]

See even that guy^ is faster then me.

[stumbaugh]

sorry man, it's just what i do. Thats why they call me the G.O.A.T -Greatest Of All Time

[1low03gt]

13.1 @ 106/107mph with 1.7/1.8 sixty foots,and that is the full 1/4 mile.
with the following mods...
Stock 4.6 with
VT/Cushman stage II n/a cams with comp springs
Drop in K&N
MAC h pipe
Flowmaster 40's
SCT custom dyno tuned chip
Ported upper stock plenum & throttle body with intkae spacer
4.10 gears
Moser axles
MAC diff girdle
Proform upper & lower rear control arms
Eibach sportline springs
Lakewood foxbody 90/10 drag struts
B&M ripper shifter
UPR tripple hook quad,and firewall adjuster
M/T street radials
Ford Racing aluminum driveshaft
Deleted decklid spoiler
Deleted antenna
Deleted foglights
She dyno'd 287 hp,and 310 torque
Those are the mods that would've helped
also have other mods,but don't really help the 1/4 ile LOL!
I have since added a '01 ported Bullitt intake,and Steeda underdrive pulleys,and soon will be installing my Ford Racing headers that i got a huge deal on 2 years ago.

[stumbaugh]

Man that car is sick...absolutly love it

[mloch4.6]

my car is a 99 gt 5-speed my mods are professional products upper plenuem,lower intake,throttle body. c@l cold air pipe,and mass air meter,k@n filter,underdrive pulleys,oil seperator,diablosport programmer,bbk x-pipe flowmaster 40 series catback,upper and lower control arms,eibach lowering springs,spec clutch,pro 5.0 shifter,white guages,chrome 03-04 17x9,17x10.5 cobra wheels mach1 grill delete thats pretty much it might be a few things i left out, i took it to little rock to the dyno to james heath and it laid down 258hp 280tq but it has 160,000 miles to so it might would do better but i have not took it to the track yet. getting ready to do a 4valve swap soon

[oxman]

Sounds like a really nice Stang! You should post a thread and a pic or two in the news/intro section if ya get a chance. ;) my car is a 99 gt 5-speed my mods are professional products upper plenuem,lower intake,throttle body. c@l cold air pipe,and mass air meter,k@n filter,underdrive pulleys,oil seperator,diablosport programmer,bbk x-pipe flowmaster 40 series catback,upper and lower control arms,eibach lowering springs,spec clutch,pro 5.0 shifter,white guages,chrome 03-04 17x9,17x10.5 cobra wheels mach1 grill delete thats pretty much it might be a few things i left out, i took it to little rock to the dyno to james heath and it laid down 258hp 280tq but it has 160,000 miles to so it might would do better but i have not took it to the track yet. getting ready to do a 4valve swap soon

[Blackout_03]

03 Mach 1

JLT CAI
Steeda shifter, clutch quad, firewall adj
UPR O/R X
Bassani CB
Raptor shift light
FRPP 4.10's
SCT with DynoSpeed email tune
Cut GT springs
Kenny Brown C/C plates
26/11.50/16 MT ET Streets


1.67 60ft 10.1@104 1000ft.

[ArkansasMystic]

Are we just posting info for GT's here, or any SN95?

[oxman]

any sn-95 but i think for this particular topic he's looking for just GT numbers and mods.?

[06MUSTANGGT24V]

lol...My mod is 2 years :P

[stumbaugh]

Any sn95 will be fine.

[Joey5.4]

my car is a 99 gt getting ready to do a 4valve swap soon
Good to se ya made it over here Michael. before you make your mind up on the 4v swap, have you looked into the new Trick Flow 2V heads???
also you shoud post up in the newb introductions and tell everyone about all the Mustangs you have owned.

[01LonestarBullitt]

MAC ceramic long tubes
Grey hound performance o/r x pipe
Magnaflow magnapacks
MGW short throw shifter
Ford racing performance parts 3.73 gears
SCT SF3 flash tuner
K&N air filter

No engine mods

13.7 @ 103.5 mph on the 1/4 mile

like said before, with some how to put traction to the trac like drag radials, i could run a 13.3 on the 1/4 mile possibly with some good drag radials

[ArkansasMystic]

96 Cobra
King Cobra clutch
FRPP 3.73's
MGW Shifter
80mm Pro-M mass air meter
9mm FRPP wires
Mac underdrive pullies
Flowmasters
Mac o/r H-pipe
And it seems like I'm forgetting something, just can't think at the moment. I have a few other things like being lowered with H&R sports and MM C/C plates.

I've only been to the track at Centerville, so my best thus far is 11.4 in the 1000 ft. That was with a 2.2 60ft, so I've got a good bit of room for improvement. It put down 286rwhp and 284 torque on the dyno.

[MrEman985]

puttin down 301 rwhp and 311 rwtq. really need to get some good drag radials cause i am having some serious issues with hooking up. looking forward to the next track day so that i can see what it really puts down before i store it for three years. :(

[sweet2kstang]

bone stock long block with:
c&l maf and intlet
75mm t/b
ported gms upper plenum
udp's
diablo programmer
mac lt's
mac prochamber
magnapack cat back
plasma booster
gms coils
stewart components water pump
150 shot of the good stuff fed from twin 15lb bottles

the trans is built by promotion
the rear is 31 spline with 3.73's
control arms
tokico hp's all around
and on a set of stickies

car went 13.8 on motor and 11.79 on the bottle. there is more in the car, it was freaking cold the last time i went to track.

[stumbaugh]

Im guessing you meant 12.8 instead of 13.8??? That's still pretty good times. An 11 second daily driver is nothing to turn your nose up at. We are tlaking 1/4 mile times BTW to those who dont know.

[1low03gt]

Man that car is sick...absolutly love it
If that is towards my GT,thanks bro! :)

[stumbaugh]

Man that car is sick...absolutly love it
If that is towards my GT,thanks bro! :)
Yes that was torwards you. That is one of the nicest/cleanest GT's ive seen. Good Work!

[sweet2kstang]

Im guessing you meant 12.8 instead of 13.8??? That's still pretty good times. An 11 second daily driver is nothing to turn your nose up at. We are tlaking 1/4 mile times BTW to those who dont know.

correct.