sweet2kstang
06-18-2009, 12:54 PM
been a long morning, i have to get to bed so i can get up in a few hours to go to work. i finally got the fuel set up done for the most part. installed 2 gt supercar pumps, dual fpdm's, dual relay, and dual fuel pump wiring mod.
i ran 10ga wire from fpdm's down to the pumps. i used ruber gromets to keep wires safe and seal the holes, and cover the insed section with epoxy to keep the fuel from eating the rubber gromets. i am waiting on my submersible fuel line so i can reinstall the tank, should be here tomorrow.
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts040.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts041.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts042.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts043.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts044.jpg
here is the dual fpdm set up. didnt have to use 2 relays but i just felt like it. i have to run a new power wire, but i will do that when i finish with the rest of the turnk.
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts039.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts045.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts046.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts047.jpg
i ran 10ga wire from fpdm's down to the pumps. i used ruber gromets to keep wires safe and seal the holes, and cover the insed section with epoxy to keep the fuel from eating the rubber gromets. i am waiting on my submersible fuel line so i can reinstall the tank, should be here tomorrow.
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts040.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts041.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts042.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts043.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts044.jpg
here is the dual fpdm set up. didnt have to use 2 relays but i just felt like it. i have to run a new power wire, but i will do that when i finish with the rest of the turnk.
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts039.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts045.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts046.jpg
http://i183.photobucket.com/albums/x125/sweet2kstang/mustangparts047.jpg