Wheels

[04_S/C_GT]

So I think I'm gonna put wheels on my car when I get back. I'm going with 18s and I would perfer anthracite or some form of black. I was also curious if 305 will fit in my wheel wells. My car will be slightly lower then it is now. My options so far:

Saleens-Black Chrome
http://www.stage3motorsports.com/product/WR18X9SBC

FR500-Anthracite
http://www.stage3motorsports.com/produc ... Wheel.html (http://www.stage3motorsports.com/product/WR18X10BCF/199404_Mustang_18x10_Black_Chrome_FR500_Deep_Dish_ Wheel.html)

Godspeed Omega
http://www.cruizinconcepts.com/godspeed ... ustang.asp (http://www.cruizinconcepts.com/godspeed_wheels_mustang.asp)

The last one is kinda crazy looking but it might look better in person.

This is my car for those of you that don't know.

<------ Can't post pictures on the computers at work. Will try to post a better one later.

[ArkansasMystic]

I'm a huge fan of Saleens, so they'd be my choice. IDK, but for some reason they just seem to "fit" these cars.

[oxman]

I think any of those would look good!

[06invertmini]

dont believe in a 18inch rim a 305 will fit. only 17's will a 305 fit. I think its max 285 on a 18in rim. Plus on a 18 inch rim mainly all of them for mustangs are 18 by 10 as to where yours now are 17 x 10.5 .

Saleens would be my choice.

scroll down and youll see the saleens on the dsg.

http://www.moddedmustangs.com/forums/pi ... -dsgs.html (http://www.moddedmustangs.com/forums/pictures/114730-post-up-your-dsgs.html)

[stumbaugh]

Yes a 305 will fit. U can fit a 325/50/15 under the stock wheel wells of our cars. And a 325/50/15 is way taller, wider than a 305 on an 18. The only usual problem is that they hit the tail pipes, but since u don't run tail pipes, all is good. I would put the omegas on it. Everyone has saleens or fr500s. It would look good

[1low03gt]

I think any of those would look good!
I agree,tough call!!! :?

[Blackout_03]

A 305 with fit fine with any 18x10 wheel....My vote is Black Chrome Saleens or BC FR500's.

Get a 18x9 front with a 265x35x18 and a 18x10 rear with a 305/30/18...perfect combo of wheel and tires size!

[04_S/C_GT]

Thanks for the input. I think I'm set on the Black Chrome cus its not that common and it looks amazing. Ive been thinking about the omegas but in the end I just cant see paying that much for wheels. but I'm still torn between the Saleens and the FR500s. They are pretty common for our cars but you dont see many in BC so I think my car will still have a uniqueness about it. At least for the area anyways. I've about 4 months to think about it though. Out of these two: I like lip of the FR500 but I the look of the Saleens better. Do yall think the Saleens would look good with my stance or should I lower it?

[1low03gt]

Saleens with lowered ride height,or even the FR's with the lowered ride height is for the win.Tough call!
Again,either would look sick on your stang. ;)

[stumbaugh]

Lower it.

[04_S/C_GT]

Just realized that I had the BC Sallens on there twice. The link has been updated for the BC FR500s. I'm kinda worried that I might end up too low. How big of a drop should I max out at?

[Blackout_03]

i would just pull the iso's out on the springs you have now!

[stumbaugh]

Can't go wrong with 15x3 and 15x10 bogarts on a 275/50/15 nitto 555r